1/2″ BSP To 12mm Stem
The 1/2″ BSP to 12mm Stem is designed for housings utilising 1/2″ portholes and allows for connection to 12mm quick connect sockets.
1/2″ Tap Adapter Block To 1/4” Tube Ball Valve
The 1/2″ Tap Adapter Block To 1/4” Tube Ball Valve is designed to allow for the connection of 1/4″ RO tubing to 1/2″ BSP taps that must remain on, such as those connected to a cistern or under-sink to a mixer tap. The integrated ball valve allows independent and reliable water supply control to your RO/DI system.
1/2″ x 1/2″ Nippon Joiner
The 1/2″ X 1/2″ Nippon Joiner is designed to connect two 1/2″ porthole filter housings together easily and securely.
1/2” BSP to 3/8” Barbed Connector
The 1/2” BSP to 3/8” Barbed Connector allows for attachment of soft vinyl tube to any filter housing featuring 1/2″ BSP portholes. It is made of semi-opaque plastic to allow easy visibility of any blockages or debris which could impact flow rates.
1/2” BSP Under-Sink To 3/8” Tube Adapter
The 1/2” BSP Under-Sink To 3/8” Tube Adapter is designed to connect 3/8″ tube to a standard 1/2″ BSP under-sink thread fitting.
1/2” Male BSP to 12mm Quick Connect
1/2” Male BSP to 12mm Quick Connect is designed to connect 12mm hard tube to submersible powerhead pumps which utilise 1/2″ female threaded outlets such as the Syncra Silent 0.5, 1.0 and 1.5 pumps.
1/4” Quick Connect In Line Electronic Leak Sensor
The 1/4” Quick Connect In Line Electronic Leak Sensor is the perfect accessory for peace of mind agains leaks & flooding. Operating from an included 9v battery, in the event of a leak water is automatically shut off by way of an included solenoid valve and audible alarm is sounded.
3/8” Quick Connect In Line Electronic Leak Sensor
The 3/8” Quick Connect In Line Electronic Leak Sensor is the perfect accessory for peace of mind agains leaks & flooding. Operating from an included 9v battery, in the event of a leak water is automatically shut off by way of an included solenoid valve and audible alarm is sounded.
Mechanical Leak Sensor With 1/4″ Quick Connect Fittings
The 1/4” Quick Connect Mechanical Leak Sensor Valve is a simple, easy to install and reliable way to add leak detection and redundancy to your RO/DI setup.