1/4″ BSP Ball Valve With 1/4 Quick Connect Fittings
The 1/4″ BSP Ball Valve With 1/4 Quick Connect Fittings is a 1/4″ BSP Ball Valve that comes preassembled with 2x 1/4″ Straight Quick Connect fittings. Made from durable polypropylene these heavy-duty valves are designed to last and can be used in either flow direction.
1/4″ Quick Connect In-Line Elbow
The 1/4″ Quick Connect In-Line Elbow allows for inline connection of 1/4″ RO tube at a 90 degree angle.
1/4″ Quick Connect In-Line Joiner
The 1/4″ Quick Connect In-Line Elbow allows for straight inline connection of 1/4″ RO tube.
1/4″ x 1/4“ 90° Elbows
A 1/4″ NPT to 1/4″ push fitting 90° elbow commonly used when connecting 1/4″ tubing to 10″ X 2.5″ canister housings.
1/4″ x 1/4“ Straight Quick Connect
A 1/4″ NPT to 1/4″ straight push fitting commonly used when connecting 1/4″ tubing to 10″ X 2.5″ canister housings.
1/4” Quick Connect In Line Electronic Leak Sensor
The 1/4” Quick Connect In Line Electronic Leak Sensor is the perfect accessory for peace of mind agains leaks & flooding. Operating from an included 9v battery, in the event of a leak water is automatically shut off by way of an included solenoid valve and audible alarm is sounded.
1/4” Tube Splitter
Used for splitting a single ¼” line into 2 separate lines.
Commonly used in a range of different RO system plumbing projects, with multiple different uses.
1/4” x 1/4” Quick Connect Check Valve
These fittings ensure that water is only able to travel in one direction preventing backflow, often used in conjunction with Auto Shut-Off Valves.
[wholesale_content]
Please Note: This product is supplied without retail packaging
[/wholesale_content]
1/4” x 1/4” Quick Connect to 1/2” Bulkhead
Used for mounting 1/4″ quick connect fittings into glass and plastic such as water storage drums or ATO reservoirs.
Commonly used in a range of different RO system plumbing projects, with multiple different uses.
1/8″ x 1/4“ 90° Check Valve
Used when connecting 2 RO membrane housings in series.
These fittings ensure that water is only able to travel through the next membrane in the correct direction, preventing wastewater from combining with product water.
1/8″ x 1/4“ 90° Elbows
A 1/8″ NPT to 1/4″ push fitting 90° elbow commonly used when connecting 1/4″ tubing to RO filter housings.
300 ML – 50 GPD Flow Restrictor
Flow Restrictors create pressure throughout the RO membrane element and maintain the desired ratio of reject flow (to drain) and permeate (product) flow.
All flow restrictors are rated as MLM (mL per minute).
It is crucial that the correct flow restrictor is selected, based on your RO membrane.
400 ML – 80 GPD Flow Restrictor
Flow Restrictors create pressure throughout the RO membrane element and maintain the desired ratio of reject flow (to drain) and permeate (product) flow.
All flow restrictors are rated as MLM (mL per minute).
It is crucial that the correct flow restrictor is selected, based on your RO membrane.
550 ML – 100 GPD Flow Restrictor
Flow Restrictors create pressure throughout the RO membrane element and maintain the desired ratio of reject flow (to drain) and permeate (product) flow.
All flow restrictors are rated as MLM (mL per minute).
It is crucial that the correct flow restrictor is selected, based on your RO membrane.
800 ML – 200 GPD Flow Restrictor
Flow Restrictors create pressure throughout the RO membrane element and maintain the desired ratio of reject flow (to drain) and permeate (product) flow.
All flow restrictors are rated as MLM (mL per minute).
It is crucial that the correct flow restrictor is selected, based on your RO membrane.
Mechanical Leak Sensor With 1/4″ Quick Connect Fittings
The 1/4” Quick Connect Mechanical Leak Sensor Valve is a simple, easy to install and reliable way to add leak detection and redundancy to your RO/DI setup.
Pressure Gauge 1/4” Quick Connect Fitting
The Pressure Gauge 1/4” Quick Connect Fitting is perfect for mounting any 1/8” M Connection pressure gauge to your RO system in-line with 1/4″ quick connect fittings.
Pressure Gauge Kit – 1/4″ Quick Connect Fittings
The minimum operating pressure for an RO unit is 50psi and it is essential to monitor this to ensure that your system is always working at an optimal level. RO membranes will produce more wastewater and high TDS production water when operating with insufficient pressure.
This kit includes the 1/8” M Connection Pressure Gauge and Pressure Gauge 1/4” Quick Connect Fitting.