1/4″ x 1/4“ 90° Elbows
A 1/4″ NPT to 1/4″ push fitting 90° elbow commonly used when connecting 1/4″ tubing to 10″ X 2.5″ canister housings.
1/4″ x 1/4“ Straight Quick Connect
A 1/4″ NPT to 1/4″ straight push fitting commonly used when connecting 1/4″ tubing to 10″ X 2.5″ canister housings.
1/4” Quick Connect Tee
Commonly used in a range of different RO system plumbing projects, the 1/4″ Quick Connect Tee joins three 1/4″ quick connects in a “T” configuration.
1/4” Tube Splitter
Used for splitting a single ¼” line into 2 separate lines.
Commonly used in a range of different RO system plumbing projects, with multiple different uses.
1/4” x 1/4” Quick Connect Check Valve
These fittings ensure that water is only able to travel in one direction preventing backflow, often used in conjunction with Auto Shut-Off Valves.
[wholesale_content]
Please Note: This product is supplied without retail packaging
[/wholesale_content]
1/4” x 1/4” Quick Connect to 1/2” Bulkhead
Used for mounting 1/4″ quick connect fittings into glass and plastic such as water storage drums or ATO reservoirs.
Commonly used in a range of different RO system plumbing projects, with multiple different uses.
1/8″ x 1/4“ 90° Check Valve
Used when connecting 2 RO membrane housings in series.
These fittings ensure that water is only able to travel through the next membrane in the correct direction, preventing wastewater from combining with product water.
1/8″ x 1/4“ 90° Elbows
A 1/8″ NPT to 1/4″ push fitting 90° elbow commonly used when connecting 1/4″ tubing to RO filter housings.
3/8″ x 1/4“ 90° Elbow
A 3/8″ NPT to 1/4″ push connect 90° elbow is commonly used when connecting 1/4″ tubing to booster pumps.
300 ML – 50 GPD Flow Restrictor
Flow Restrictors create pressure throughout the RO membrane element and maintain the desired ratio of reject flow (to drain) and permeate (product) flow.
All flow restrictors are rated as MLM (mL per minute).
It is crucial that the correct flow restrictor is selected, based on your RO membrane.
400 ML – 80 GPD Flow Restrictor
Flow Restrictors create pressure throughout the RO membrane element and maintain the desired ratio of reject flow (to drain) and permeate (product) flow.
All flow restrictors are rated as MLM (mL per minute).
It is crucial that the correct flow restrictor is selected, based on your RO membrane.
550 ML – 100 GPD Flow Restrictor
Flow Restrictors create pressure throughout the RO membrane element and maintain the desired ratio of reject flow (to drain) and permeate (product) flow.
All flow restrictors are rated as MLM (mL per minute).
It is crucial that the correct flow restrictor is selected, based on your RO membrane.
800 ML – 200 GPD Flow Restrictor
Flow Restrictors create pressure throughout the RO membrane element and maintain the desired ratio of reject flow (to drain) and permeate (product) flow.
All flow restrictors are rated as MLM (mL per minute).
It is crucial that the correct flow restrictor is selected, based on your RO membrane.